Bronze Embracing Couple Statue

Huizhou Hexin Intelligent Manufacturing Industrial Co., Ltd. is one of the leading manufacturers and suppliers of bronze embracing couple statue in China. We are committed to providing high quality customized products made in China with competitive price. If you're going to buy bulk fancy bronze embracing couple statue, welcome to get pricelist from our factory.

The umbrella anchors the composition. It works like a small roof, with segmented ribs, a slightly uneven edge and a pointed tip. The shaft runs down between the two heads, so the umbrella stays in view from every side.

Coat texture that looks rain-soaked. Both coats have deep folds and a pitted surface that suggest wet fabric, which suits a rainy day couple sculpture. His coat falls below the knee, with flap pockets and a raised collar. Hers is shorter and belted, with a fur-like texture at the collar. Her legs and high heels stay visible.

A base that belongs to the scene. The couple stands on an irregular, puddle-like patch of bronze, set on a round black marble base.

Dark brown-black antique patina. The color is applied by hot patination and then sealed. It suits indoor display, and it also works outdoors when the patina and base are matched to your local climate.

Signed on the base. The base carries the signature, and we can engrave your logo, name or a date instead.

Made to your design. We can make a custom bronze statue from a photo, a sketch or a 3D file, in any size from a tabletop piece to a life-size garden statue.

As a romantic bronze statue, it works well on a mantel, sideboard or reception desk. You can walk all the way around it, and every angle shows different details. The man's brimmed hat, the woman's hat and the long coats give this embracing couple sculpture its period street look.

This bronze couple statue was cast with our silica sol lost-wax process at our Huizhou factory. We cast mainly with silica sol and plaster lost-wax methods, and the workflow below applies to every bronze couple sculpture we make. The workshop covers more than 4,000 square meters (about 43,000 sq ft) and employs over 50 people, including several senior technicians with 20+ years of bronze casting experience. We have been in this business for more than 15 years, have completed over 2,000 projects, and have clients in the US, Europe, Southeast Asia and Australia. Here is how we make a bronze couple statue by lost-wax bronze casting, step by step.

1. 3D Modeling and Clay Sculpting

For an embracing couple, the pose is set at this stage: how close the two stand, where their hands rest and which way the umbrella tilts. To make a custom bronze statue from your photo, sketch or 3D file, we sculpt the couple digitally or in clay and send it to you for approval. We do not start casting until you approve the model. A change at the clay stage costs little compared with a change in metal.

2. Mold Making

Once the model is approved, our mold makers build the mold from it. A figure with an umbrella, arms and coat folds has plenty of undercuts, so the mold is made in sections that release without damaging the surface. The texture of the coats and the base is captured in full at this stage.

3. Wax Injection and Demolding

Molten wax is injected into the mold and left to set. What comes out is a full-size copy of the statue in a material that is easy to alter. Every wax is checked against the approved model before it moves on.

4. Wax Finishing and Assembly

Fine seam lines left by the mold are removed, and soft edges are repaired by hand. This piece is two figures plus a separate umbrella, and the wax parts are joined into a single piece here. The collars, hat brims, hands and umbrella ribs also get their final detailing now, while the wax is still easy to refine.

5. Shell Building and Sand Coating

The finished wax is dipped again and again in silica sol slurry and coated with fine sand, building up a ceramic shell layer by layer. The shell has to be thin enough to keep fine detail and strong enough to survive the heat of pouring. The number of layers depends on the size and weight of the piece.

6. Air Drying and Steam Dewaxing

Once the shell has air-dried until it is strong enough, steam melts the wax out and leaves a cavity that matches the statue exactly. The wax is lost at this step, which gives the method its name.

7. Bronze Pouring

Bronze is melted in a furnace and poured into the empty shell. The metal fills every fold and edge of the cavity, including fine details like the umbrella tip and the woman's shoes. When it cools, the metal even carries the surface texture of the original wax.

8. Shell Removal and Welding

The ceramic shell is knocked away to reveal the rough casting. The gates and risers left by the pouring system are cut off, and any parts cast separately are welded together. Weld seams are marked and left for the next step.

9. Grinding, Polishing and Sandblasting

Workers grind down the weld marks and rework the detail back into the surface, then polish wherever a smooth finish is needed. Sandblasting then evens out the surface before patination. The underside is ground flat so the statue sits firmly on its base. Careful hand-finishing at this stage removes the marks of casting and restores the sculpted detail.

10. Hot Patination

Color is applied by heating the bronze surface. This piece received a dark brown-black antique finish, slightly lighter on the raised parts of the folds. After patination, the surface is sealed to protect it from oxidation.

11. Packing

After inspection, the finished piece is wrapped in protective material and placed inside a foam-lined wooden export crate. The crate is built for long-distance shipping and protects the statue from knocks in transit. It is the same packing we use for shipments to the UK, the US, Europe, Southeast Asia and Australia.

Another UK client came to us with a different subject but a similar goal: a small bronze figure group to display and keep for the long term. The piece shows two soldiers chasing each other while playing rugby. It measures 32 × 30 × 21 cm (12.6 × 11.8 × 8.3 in) and weighs 5.3 kg (11.7 lb).

The client supplied a 3D file, so we skipped the sketch stage and worked directly from their model, then adjusted it to suit the display space. Fitting the model to the site meant checking three things: the footprint on the shelf or tabletop, the height against the objects around it, and the weight the surface can safely carry. Before making the mold, we went through each point with the client and revised the model where needed.

From there, production followed the same process as the couple statue: wax, shell, casting, finishing, patination and export packing. Because the two soldiers are caught mid-chase, with arms, legs and the rugby ball all in motion, we took extra care during wax finishing.

If you'd like a custom bronze couple statue made from your own wedding photo or design, the process is the same. Send us your photo, sketch or 3D file, along with the target size and where it will be displayed, and we'll give you a free quote.

1.Bronze casting from the approved model

2.Surface patination and sealing

3.Base and engraving (signature or custom text)

4.Protective packing and wooden export crate

5.Quality inspection before shipment

6.Free consultation and progress photos during production

7.After-sales guidance on bronze care, cleaning and oxidation protection

Mold fees, shipping, import duties, on-site installation and special display lighting are quoted separately. The price depends on material, size, complexity, finish and quantity, so please send reference images and your target size for an accurate quote.

Note: The sculpture shown on this page is a reference for custom design and production and is not for sale. Final specifications, price, lead time, shipping arrangements and warranty coverage are as stated in your quotation.

Hot Tags: bronze embracing couple statue, China bronze embracing couple statue manufacturers, factory, bronze modern figure artwork, bronze realistic statue, bronze reclining figure sculpture, bronze walking figure sculpture, custom bronze figure statue, large bronze figure sculpture